Machinery: snowblowers, back-hoes, tractors, logging equipment, lawn and garden equipments

Engine hoist and stand (posted: 6/30/2009) Homemade heavy duty engine puller, large castor wheels, well made, requires small bottle jack to operate, also nice factory made engine stand, sell the pair for $100 firm (705)474-2978 email

Carbide Router Bits (posted: 6/29/2009) Hello woodworkers 9 piece Vermont American used 2-3 times in custom case includes misc other bits $50. a bargain pics email

Stihl 026 Chainsaw Wanted !! (posted: 6/25/2009) I am looking for a Stihl MS-026, chainsaw , with 16" bar. Must be in very good condition with low hours. I have an 027 semi-pro saw now, with about 2 hours use, but find it too heavy and hard to clean internally. I use an 024AV now, which I really enjoy using and basically is the same as the 026. Thx ! email

car/equipment hauler (posted: 6/23/2009) flatbed trailer 80"x20ft two 6000lbs axels electric brakes stake and pockets w/rub rail 52" ramps front safety bar, checker plate fenders purchased 2003 now need a 14k pictures available $3200 email

Lincoln Stick Welder 250 (posted: 6/18/2009) I am selling a Lincoln Electric Stick Welder 250, AC/DC. Comes with weld cables and ground clamps. Only has 200 hours on it. Was bought in November of 2001 for business use. Paid $1700.00 after taxes, selling for $1100.00 o.b.o. I have the original reciept to prove. EXCELLENT condition. Email robinkon@hotmail.com for pictures! Thanks email

Lawn Tractor (posted: 6/17/2009) White 12HP, 38" cut. Machine in excellent condition. New Battery, serviced and ready for summer. Free in town delivery. $695 or best offer 499-3619 email

container (posted: 6/13/2009) wanted 20 foot container in good condition email

New Rebuilt Massey Tractor (posted: 6/11/2009) Model 285, Professionally rebuilt engine & fuel pump for a work value of $6500.00. 2 wheel drive, asking $ 8900.00. (705)563-2854 email

Caterpillar Fork Lift (posted: 6/11/2009) Model V50DSA, 5000 lbs, asking $7300.00 (705)563-2854 email

Riding Lawn Mower (posted: 6/11/2009) 2003 Murray Riding LawnMower. Perfect for those average size lawns, seniors or people who don't want to fight with their push mowers any more! 12HP Briggs and Stratton, 30" cutting deck, mulching blade, will turn on a dime, easy to handle and is in excellent condition. Asking $725, will deliver. (705)499-3619 email

Mig Welder (posted: 6/11/2009) Power Fist (New) 110V. Uses Flux Core Wire or Gas. Household current makes it perfect for everyday jobs. Asking $300. 499-3619 email

Front end loader (posted: 6/7/2009) front end loader for sale was previously on a 1370 2 wheel drive "White" with new control valve, extra pump and mounting all included best offer takes it 757-2879 and on weekends 757-1635 (705)757-2879 email

Carbide Saw Blades (posted: 6/1/2009) 7-8 blades most 9 & 10 " 40-60-80 tooth lots of carbide on tips a bargain at $25. pics email

car dolly (posted: 6/1/2009) 450.00 must be seen (705)752-3171 email

Compressor (posted: 5/30/2009) 15 HP DeVilbiss compressor (10 HP motor), large horizontal tank, 3-phase wiring, enough to run a large, busy shop. $1,000.00 (705)476-1630

tractor (posted: 5/29/2009) 79 Massey Ferguson tractor. diesel, 2wd,bucket (705)752-3913 email

Delta drill press, scroll saw, sander (posted: 5/26/2009) ($250 for all)I'm selling my delta tools. They where bought all at once a year and a half ago and barely used. I never really got into building stuff so never really used them. Everything is in perfect condition and works perfectly. I have the original boxes and manuals for everything. Heres some info- Scroll saw: (model: SM600) $120 separate 16" throat with variable speed and quick release blade chuck. BIIGG motor with lots of power and an adjustable table. Ill include: -LOTS of different blades -box/ manuals -the tool to change blades Description from online: No matter your skill level, you’ll feel comfortable right from the first cut with this neat little scroll saw. It’s very user friendly, so that plus the price makes this a fabulous choice for a first scroll saw. One of the big challenges with a scroll saw is changing the blade, but Delta’s Quickset II blade system just snaps open and closed, so a once arduous task is reduced to an easy couple of seconds. That means, of course, that interior cuts, once the dread of beginners, are actually fun with this saw. Max cutting depth is 2 inches, but only with soft woods. The spring hold-down is a nice design that holds the workpiece without impeding your line of sight, and the blower keeps the cut line nice and clear. You can get a zero-clearance insert for this saw that will leave your cuts absolutely tear-free and smooth, too. The 16-inch throat is plenty for most hobbyists’ needs, giving you enough room to turn and maneuver. The smoothly machined table tilts nicely to 45 degrees, and blade tensioning and speed control are right at your fingertips. We think it’s quite a saw for the price Drill press: (model: DP200) $110 separate 10" benchtop drill press with variable speed. 1/3HP motor and adjustable table. Lots of power and is in excellent condition. Ill include: -chuck key and bolts to mount it -box and manual -some boaring bits Description from online: This model has more capacity and more weight than its little brother--Delta's DP115 8-inch benchtop drill press--but you're still not talking about a lot of shop space or a lot of money. We like this drill press because it can drill to the center of a 10-inch-wide board with a 2-1/4-inch stroke, its table tilts left and right to 45 degrees with a positive stop at 0, and it offers five drill speeds depending on your material and bit size. You don't even have to know what speed is the right one--there's a chart inside the pulley cover that dictates belt speed according to hole size and material. Changing speeds is as simple as adjusting the belt on the pulley. Have some repetitive drilling to do? The adjustable-position locking depth stop takes the trouble out of the job. We like the Shopmaster drill presses for their Delta precision and tight prices, but we have to admit that the rack-and-pinion table height adjustment and the built-in gooseneck lamp on this model win our hearts. The three-jaw chuck will accept bits up to 1/2 inch, and when you're done drilling, just pop out the removable safety switch to prevent unauthorized use. Belt/disc sander: (model: SA150) $50 separate Sander with a 5" disc and 1" belt for detailed areas. Lots of power and it runs perfect. Ill include: -some belts -pack of stick on discs -box/ manuals Description from online: If your workshop doesn't have one of these combination sanders, it's probably because you don't think you need it. But put it to work once, and you'll realize you can't get along without it. Its uses are endless. You know those tight curves and angles you have to sand by hand? Not anymore, thanks to this Shopmaster sander. The automatic belt-tensioning and tracking controls are conveniently located and easy to use, and the built-in power takeoff for a flexible shaft accessory (sold separately) is a great extra touch that allows you to accomplish any number of additional tasks. Finishing curves or odd-shaped work is a cinch when you remove the belt platen, and you'll even be sanding chamfers and bevels just by tilting the sturdy aluminum tables on both the belt and the handy 5-inch disc sanders. The included miter gauge allows you to sand at compound angles, too. The side panel removes in a blink to change belts. The 1-inch belt sands 3,150 surface feet per minute powered by a 1/4-horsepower induction motor. A built-in dust port allows connection to your dust management system. Again Im selling because I never got into it. $250 for all ( steal! I paid over $400 for all of it!) email

Mower Conditioner SOLD (posted: 5/23/2009) Older international hay mower conditioner for sale 9 foot cut Used last year SOLD $800.00 Also older hay wheel rake Good condition $250.00 No longer cutting hay email

TRACTOR IMPLEMENTS (posted: 5/19/2009) LOOKING FOR TRACTOR IMPLEMENTS FOR PTO. TILLERS, BRUSH HOG, SCRAPER BLADE. (705)663-1692 email

post hole digger (posted: 5/15/2009) 3 point hitch mounted post hole digger for farm tractor very good condition $500 email

farm tracor for sale (posted: 5/10/2009) Massey Ferguson 35E diesel 3 cyl. with 6 foot 2 stage snowblower, rear mounted blade, set of chains, front hitch, draw bars. New starter installed last year, low hours on rebuilt motor. Excellent condition. asking $7000 o.b.o email

Diesel engine (posted: 5/7/2009) 453 Detroit diesel engine. 4 cylinder. Starts and runs excellent. Comes with hydraulic pump assembly (3 pumps) that bolts onto flywheel. $3000 firm. (705)752-2237

Generator (posted: 5/6/2009) 5000 watt Coleman Generator, 220 & 110 watt outlets,Home made wheel kit, runs excellent, hardly used. $600.00. Also 50 ft of heavy duty extension cord available (705)476-5049 email

2 Lawn Tractors for sale (posted: 5/6/2009) Craftsman 15HP riding lawnmower with a 42" cutting deck, very good condition, $800. Older Turf Trac with 16HP Twin. New Rear Wheels, engine serviced, good running condition $675. (705)499-3619 email

Electric Lawn Mower (posted: 4/29/2009) 3.5 Black & Decker Electric Lawn Mower, One touch height control Excelent condition. $ 75.00 (705)476-5049 email

16.5 Foot Cargo Trailer (posted: 4/22/2009) I have an Interstate 1 , 16.5 FT. inside floor measurement with around 1200 klms on it since bought new in 2006. Paid over $9000.00 for it. Asking $7100.00 or trade for older backhoe, or other eguipment for the farm. Pics available on request. (705)724-5759 email

Black & Decker Lawn Mower (posted: 4/22/2009) Black and Decker 5 hp cordless lawn mower for sale. it is battery operated in great shape. asking $50.00 firm (705)497-0208 email

Chain Saws (posted: 4/19/2009) McCulloch MAC 110-12'' Bar with Case.Other is MAC 10-10 with 16' Bar. $50 for the pair. (705)495-2874

Surface gauge (posted: 4/19/2009) Surface gauge, with magnet mount. Imperial measure. Like new. $20 In Powassan email

Massey 3165 Loader/Backhoe (posted: 4/18/2009) Early '70's, new engine, 2wd, $6000 (705)497-3143 (705)497-3143 email

Snowblower (posted: 4/7/2009) 10HP 29" cut Craftsman snowblower with electric start. $400 or best offer. Please contact via email. email

Wanted - Snowblower (posted: 3/31/2009) Snowblower wanted in good condition with a fairly wide swath and good sized motor. Reasonably priced....Thanks email

kabota Tractor (posted: 3/31/2009) Kabota Tractor in the early '80's, 2 cyl diesel, 17.5hp,allied loader, back blade, 4x4 with diff. lock. $10,900 OBO (705)497-3143 (705)497-3144 email

hitachi cordless hammer drill (posted: 3/28/2009) hitachi cordless hammer drill works great 2 years of warranty left including all three batteries paid 500. asking 200.00 (705)358-1386 email

Caterpillar 236 skid steer door (posted: 3/24/2009) Wanted: Caterpillar 236 skid steer door. email

8hp Tecumshe (posted: 3/24/2009) 8hp Tecumshe. Horizontal shaft. Electric start. Runs Good. $250.00. Contact Kody at 705-492-3376 or Vitale at 705-471-6123 (705)4923376 email

SAW MILL (posted: 3/11/2009) Looking for a used saw mill...good price! (705)4995749 email

tractor attachment (posted: 3/8/2009) logging winch(norse)3200.00$5ft brush cutter(bushhog)1200.00$ (705)724-9751 email